![]() ![]() If the first technique doesn’t work, you can go to Plan B, using the file part of a metal nail clipper. If not, you may have to start everything all over again. At this point, you should be able to slide the cabinet door open as long as the paper clip is completely removed from the keyhole. If you have to turn the paper clip counter-clockwise to get it open, it will likely be the type of lock system that is vertical when unlocked. Most file cabinet locks will be in a horizontal position when they’re open, but note that some will end up in a vertical position instead. Only when you notice the keyhole in a horizontal position should you remove the paper clip. Keep turning your paper clip until you notice the keyhole is horizontal. Do this gently, so nothing breaks, and once the paper clip turns to the right or left without catching on anything, you’ve found the unlock position.Īlso, remember that some cabinets are opened by turning the key in a counter-clockwise position, although most accommodate a clockwise position instead. To find the unlock position, you have to move the paper clip to the right and left until you feel a “smooth” action without any catches. How to Unlock a Filing Cabinet with a Paper Clip This is because the bent end is going to push down on the pins inside of the lock, and it has to be in a vertical position to do this. Once you have it in this shape, you simply place the bent end into the keyhole, making sure the bend is held vertically and not horizontally. You might need a set of pliers to do this correctly, and make sure you leave the tip of the paper clip bent at an angle. Using a paper clip is the easiest way to learn how to pick a file cabinet lock, and all you have to do to get started is straighten the paper clip. You might also like: Are File Cabinets Fireproof? 1. You should also know that, at this point, your biggest concern is likely breaking the paper clip or nail file – not the file cabinet itself! So, go ahead and jump in and start opening that cabinet because the worst that will happen is you’ll have to get a second paper clip or nail clipper file to get the job done. All you need is the right know-how, and you’re ready. Once you get your hands on one of these items, you’re ready to get started, and best of all, you don’t need any special skills to unlock a filing cabinet without a key. Getting a file cabinet open means starting with the right tools, but fortunately, when we say “tools” we mean one of two things – a paper clip or a nail clipper file! If you’re at the office, finding a paper clip should be no problem whatsoever, and a lot of people have a set of nail clippers in their purse or pocket. Getting Started – What Tools Do You Need? We may earn a commission at no additional cost to you. Office Solution Pro is supported by its readers. The truth is, learning how to pick a file cabinet lock is a lot easier than you think, and best of all, you don’t have to permanently damage the file cabinet just to get it open again. You can do the same with a nail clipper file. Hold the paperclip vertically and insert the curved end into the keyhole, which will push down on the pins inside. ![]() ![]() How to pick a file cabinet lock? To pick a file cabinet lock, straighten out a paperclip and leave one of the ends curved. In fact, keys to filing cabinets are some of the most elusive types of keys, but if you’re at work and suddenly discover that your file cabinet is locked and you’re unable to get into it, don’t panic. It’s not that uncommon to lose a key to a filing cabinet when you’re at work or never to receive one at all. ![]()
0 Comments
Leave a Reply. |